Image : http://www.flickr.com
My first telescope came with a loop for hanging around his neck. The tape was so long that every step I took the binoculars hit my stomach. When I was in a hurry, I was holding on the binoculars so that you do not jump to wild.
The liberalization of the hands while walking on a road is a good idea. If you are not in possession of a stick, you might want to be able to stabilize around a tree to collect or holdBalance.
If the strap may be shorter or adjustable, which would have been great. When I put the binoculars I have the strap through the loops on the sides of the binoculars near the eyepiece and made a knot on the opposite side.
It would be quite easy but the nodes hung a little 'more on the strap to shorten its length, but this is a long piece of belt loose sheets. Not just cut out - there's a better way to shorten theBinocular strap.
What you do is the belt loop on itself, so that less of the belt turns the head. Let me explain.
One end of the strap through a loop on the binoculars, and a knot on the opposite side of the cycle. Make sure the node is a tough book.
Plug the other end of the belt when the ring on the opposite side of the binoculars, but the knot again.
Hold the free end of the strap and put the binocularsaround the neck. Pull the free end of the strap to bring the binoculars. Head up a bit 'to get an idea of where the race binoculars. Finding a comfortable position for them.
You must keep the tape, for a walk. Once you know where it hangs like, highlight the strap - you can only stop on the section, where you tie the second knot.
Tie a simple knot there and to examine whether this is a good length for you.
MostBinocular comes with a belt buckles very small. The reason that the buckles, so that the strap through the buckle and folded back on itself to keep it. In this way, there is no chance of losing your binoculars, because a poorly tied knot is opened. Furthermore, using the buckles, you can strap on binoculars to accommodate variable lengths.
Slide the cap on the loop (before putting it through the ring on the binoculars) and make sureBelt running from bottom, above the bar half of the buckle and back through the other side of the buckle.
Loop the strap through the loop on the binoculars out and then again on the buckle.
Move the strap between the first part of the cycle that is already with the buckle and the buckle itself, above the center bar of the buckle, and down to the last section of the closure. The belt is held firmly in place.
Now you have an adjustable binocularBelts. If you want to extend the belt for all you have to do is loosen the belt to one of the buckles and pull the band for a longer.
If your telescope does not have the belt buckles, do not worry. You can only associate a node to the network binoculars to keep him able to bind and connect to another node on the free end of the can. In this way, put the free end of the tape is not in your path.
0 ความคิดเห็น:
แสดงความคิดเห็น